- 2 inputs for connecting two wired sensors
- 1 input for tamper
- 1 output for powering sensors 3V, 50 mA
- Three CR123A batteries
- Up to 5 years of operation (2 wired detectors, 24 μA each in standby)
- Over-the-air (OTA) firmware updates
- Development of the device according to the users
WIRED PORT (INPUT) MODULE
U-PROX WIREPORT
U-Prox Wireport
IR sensor connection module (IR barrier)
2 inputs for connecting two wired sensors
1 input for tamper
1 output for powering sensors 3V, 50 mA
Three CR123A batteries
Up to 5 years of operation (2 wired detectors, 24 μA each in standby)
Over-the-air (OTA) firmware updates
Development of the device according to the users
Gallery
Gallery
U-Prox Wireport
Complete set
Inputs
3 – ALM1, ALM2 (Alarm) and TMP (Tamper switch)
Power output
3V, 50 mA max.
Power
3V, three CR123A batteries included
Service life of battery
Up to 5 years, (2 wired detectors, 24 μA each in standby)
Radio frequency
ISM-band wireless interface with several channels, up to 4800m (in line of sight)
Parameters of radio
- ITU region 1 (EU, UA): 868.0 to 868.6 MHz, bandwidth 100kHz, 20 mW max., up to 4800m (in line of sight)
- ITU region 3 (AU): 916.5 to 917 MHz, bandwidth 100kHz, 20 mW max., up to 4800m (in line of sight)
Communication
Secure two way communication, sabotage detection, key – 256 bits
Operating temperature range
-10°C … +55°C
Dimensions
89.7 х 38.8 х 20.5 mm
Weight
0.34 kg
Complete set
- U-Prox Wireport;
- Three CR123A batteries (pre-installed);
- Quick start guide
