- AC controlled relay, 110-250V, 50-60Hz
- 10A @ 250V AC or 30V DC
- Pulse, trigger (bistable) modes of operation
- The operating time is adjustable from 0.5 to 255 seconds
- Small size, wide temperature ranges
- Over-the-air (OTA) firmware updates
- Development of the device according to the users
CONTROLLED AС WIRELESS RELAY
U-PROX RELAY AC
U-Prox Relay AC
Wireless relay AC module
AC controlled relay, 110-250V, 50-60Hz
10A @ 250V AC or 30V DC
Pulse, trigger (bistable) modes of operation
The operating time is adjustable from 0.5 to 255 seconds
Small size, wide temperature ranges
Over-the-air (OTA) firmware updates
Development of the device according to the users
The device is designed to control other electrical devices and must be installed on a 10A line in wall switch boxes with depth not less than 60 mm or other protective cases.
All works on the device may be performed only by a qualified and licensed electrician with disabled fuse or power supply. Observe national regulations.
Gallery
Gallery
U-Prox Relay AC
Technical specifications
Output
OUT N, OUT L, 10A @ 250V AC max
Operations
> 100 000
Power
110-250V AC, 50-60Hz
Modes
Impulse, trigger (bistable)
Impulse duration
adjustable: 0.1 … 250 seconds
Response delay
max. 5 seconds
Radio frequency
ISM-band wireless interface with several channels, up to 4800m (in line of sight)
Parameters of radio
- ITU region 1 (EU, UA): 868.0 to 868.6 MHz, bandwidth 100kHz, 20 mW max., up to 4800m (in line of sight)
- ITU region 3 (AU): 916.5 to 917 MHz, bandwidth 100kHz, 20 mW max., up to 4800m (in line of sight)
Communication
Secure two way communication, sabotage detection, key – 256 bits
Operating temperature range
-10°C … +55°C
Dimensions
44 х 36 х 19,4 mm
Case colour
white
Weight
55 grams
Complete set
- U-Prox Relay AC;
- Quick start guide
