- 8 inputs for connecting wired sensors
- Relay (NO C). Pulse and trigger (bistable) modes of operation
- 2 outputs for powering the sensors (AUX and SWA each 200 mA 12V)
- LED Output
- Power backup: two 2500 mA lithium batteries
- 12V power supply
- Operating time on battery – up to 10 hours (on 8 wired detectors, with a consumption of 15 mA each)
- Over-the-air (OTA) firmware updates
- Development of the device according to the users
WIRED ALARM INTEGRATION MODULE
U-PROX MULTIPLEXER
U-Prox Multiplexer
The module for connecting wired security equipment
12V power supply
Operating time on battery - up to 10 hours (on 8 wired detectors, with a consumption of 15 mA each)
Over-the-air (OTA) firmware updates
Development of the device according to the users
Gallery
Gallery
U-Prox Multiplexer
Technical specifications
Inputs
8, EOL supervised (Z1 … Z8)
Output
1 relay (NO C)
LED
3V
Power output
2 outputs, AUX and SWA (switchable output), resettable fuse protected, 200 mA @12V
Power supply
10.8 … 13.8VDC
Battery backup
two 2500 mAh batteries, up to 10 hours (8 wired detectors, 15 mA each)
Radio frequency
ISM-band wireless interface with several channels, up to 4800m (in line of sight)
Parameters of radio
- ITU region 1 (EU, UA): 868.0 to 868.6 MHz, bandwidth 100kHz, 20 mW max., up to 4800m (in line of sight)
- ITU region 3 (AU): 916.5 to 917 MHz, bandwidth 100kHz, 20 mW max., up to 4800m (in line of sight)
Communication
Secure two way communication, sabotage detection, key – 256 bits
Operating temperature range
0°C … +45°C
Dimensions
167 х 120 х 38 mm
Case colour
white
Weight
0,64 kg
Complete set
- U-Prox Multiplexer;
- Two 18650 batteries (pre-installed);
- Quick start guide